• YOUR SOURCE FOR UNIQUE MUSTANG PARTS ACCESSORIES & UPGRADES

  • VISIT OUR ONLINE STORE: WWW.BANGASTANG.COM

  • 19

    Oct

    Ford Focus Parts and Accessories

    By Mr. Bangastang | Posted in Random

    Ford Focus Parts and Accessories, the 2012-14 Ford Focus is a HOT car and we’ve got parts and accessories for your Focus and ST models.

    Ford Focus ST

    Ford Focus ST

    With Ford stepping into the Tuner market with the Ford Focus ST many Focus owners are looking for aftermarket accessories to increase the performance and look of their 2012-2014 Ford Focus. One of the HOT items for the 2012-2014 Ford Focus is a Body Kit.  

    Ford Focus Body Kit '12-'14

    Ford Focus Body Kit

    The Ford Focus Body Kit that’s pictured is made from injection molded urethane and includes the Front Air Dam, Side Skirts, Rear Lower Skirt and Rear Roof Spoiler.  This Body Kit for the Focus is available painted in the OEM Ford Focus colors. For more information Ford Focus Body Kit.

    For the Ford Focus enthusiasts that likes to work on their vehicle, one Focus accessory that’s  necessary are aftermarket Ford Focus Hood Struts that eliminate the factory prop rod.

    Ford Focus Hood Struts

    Ford Focus Hood struts

    Install a set of Hood Struts on your Ford Focus is very easy and only requires a few basic tools such as, 1/4 ratchet, 10mm socket, razor blade,  towels (2) and masking tape.  The best part about  installing the Ford Focus Hood Struts is No drilling is required for installation.   We carry Hood Struts from Cal Pony which are the best on the market, they come with a lifetime warranty and have a powder coated finish.  Detailed instructions come with the Hood Struts and the price is very affordable at $119.00.  To place your order just click on the link Focus Hood Struts.

    The Ford Focus ST is a Ford Focus on steroids, with 2.0L turbo-charged engine that pushes 252 horsepower backed by a six-speed transmission and a body kit to boot, the Ford Focus ST is a pocket rocket for the tuner crowd.  We’ve got a Front Splitter for the Focus ST that raises the bar.

    Ford Focus ST Splitter

    Ford Focus ST Splitter

    Made from fiberglass that attaches to the front bumper, the Front Splitter for the 2012-2014 ST comes with Support Rods and installation instructions. Priced at $259 this Focus ST Front Splitter is a bargain.

    Here’s the link to view all of our Ford Focus Parts and Accessories.

     

     


    6

    Oct

    1999-2004 Mustang Radiator Covers

    By Mr. Bangastang | Posted in ENGINE DRESS-UP

    1999-2004 Mustang Radiator Covers $125-$160, available in satin, black anodized or polished finish.  For the Mustang owner that wants to customize their ’99-’04 Mustang we’ve got a selection of 1999-2004 Mustang Radiator Covers that will meet your needs.

    1999-2004 Mustang Radiator Cover

    1999-2004 Mustang Radiator Cover

    All of our 1999-2004 Mustang Radiator Covers are made here in the US from aluminum.  We offer several different custom engravings for the Mustang enthusiasts…..4.6L, 32 Valve for the SVT Mustang owners that drive a Cobra or Mach 1 and Terminator for the 2003-2004 Ford Mustang Cobra owner.

    1999-2004 Mustang Radiator Cover

    ’99-’04 Mustang Radiator Cover

    We also offer custom engraving for the ’99-’04 Mustang owner that wants a one off custom Mustang Radiator Cover.  Some Mustang owners have opted to add their club name, build number, nickname or horsepower rating to their Radiator Cover.  All of the graphics are engraved in our Radiator Covers for a classy look.

    Installing one of our Mustang Radiator Covers is very easy with some simple basic tools, no drilling or modification is necessary.  With the use of our SN-95 Radiator Cover it eliminates the use of that awkward factory prop rod that always gets in your way during routine maintenance.  Aftermarket Mustang Hood Struts are needed for installation at a very affordable price.  Installation of the Mustang Hood Struts is also a simple installation that doesn’t require any drilling or modification to your Mustang. Total time for installing the Radiator Cover and Hood Struts will take less than 45 minutes and the results will be very gratifying for any Ford Mustang owner.

    Does your 1999-2004 Ford Mustang 4.6L, Mach 1, Cobra or Terminator need some engine dress-up accessories?  If you answered “yes” then it’s time to upgrade to one off our Mustang Radiator Covers.  For more information about our #1 selling Ford Mustang accessory then click on 1999-2004 Mustang Radiator Covers.

     


    23

    Jun

    Ford Racing TVS Supercharger #M-6066-SGT

    By Mr. Bangastang | Posted in ENGINE UPGRADES

    Ford Racing TVS Supercharger 605HP $2,200.00 USED.  The M-6066 SGT Ford Racing Blower is a very efficient supercharger that will raise the horsepower in your 2007-2010 Shelby GT500 to 605 HP.  This supercharger is no longer available from Ford Racing.

    Ford Racing TVS Blower

    Ford Racing TVS Blower

    The TVS supercharger is a more efficient blower that is known to increase gas mileage over the stock Eaton blower that came standard on the 2007-2010 Shelby GT500.  One of the appeals of the Ford  Racing TVS Supercharger is it’s a 50 State Legal system that comes with the C.A.R.B. emissions decal.

    The Ford Racing TVS Supercharger that we’re selling is slightly used with less than 500 miles and was taken off a 2007 Shelby Super Snake.  The Ford Racing TVS Supercharger is complete with blower, inlet elbow, throttle body, Ford Racing Cold Air Intake, Ford Racing Tuner and the C.A.R.B. legal emissions decal.

    CARBOur price of $2,200.00 includes free ground shipping in the US lower 48 states with insurances. If you’ve been looking for the Ford Racing TVS Supercharger part# M-6066-SGT this is a deal that you will not find often.  This used TVS system is sold “As is” with no returns of exchanges.  To place your order just click on the following link Ford Racing TVS Supercharger.

     

     

     

     

     

     


    12

    Apr

    2014 Shelby GT500 Parts

    By Mr. Bangastang | Posted in Accessories

    Front Splitters, Rear Diffusers, Hoods, Grilles, Coil Covers and Radiator Covers are just a few items that we have for the ’13-’14 Shelby GT500, the list is long to fit your taste.

    2014 Shelby GT500

    2014 Shelby GT500

    2013-2014 GT500 owners have a long list of aftermarket accessories to choose from in both the dress-up and performance category.  Long on horsepower and improved in styling the 2013-2014 Shelby GT500 is one awesome vehicle packed with 662 horsepower from the factory.

    Carbon Fiber accessories for the ’13-’14 is the most popular upgrade the new Shelby owners are opting for.  Many GT500 owners are replacing their factory Front Splitter with a aftermarket Carbon Fiber Front Splitter.

    GT500 Front Splitter

    Carbon Fiber GT500 Front Splitter – Bangastang

    2014 Shelby GT500 loaded with all the options are selling for $60,000 and new owners are loading up with all the latest carbon fiber accessories to give their GT500 that exotic look that they deserve. In addition to the  Front Splitter Snake owners are also replacing their factory Rear Diffusers with a Carbon Fiber Rear Diffuser.

    GT500 Rear Diffuser

    GT500 Rear Diffuser – Bangastang

    The Mustang and Shelby continue to be one of the most supported vehicles when it comes to aftermarket accessories.  Exterior parts such as Front Splitters, Rear Diffusers, Rocker Panel Extensions, Front Grilles, Window Scoops, Lower Side Scoops,  carbon fiber Roof Covers, Taillight Garnish, billet Fuel Doors, Fender Badges and Hood Vents are just some of the exterior parts available for the 2013-2014 Shelby.

    Aftermarket Interior accessories are also available for the 2014 Shelby……custom Shift Knobs, carbon fiber Dash Kits, carbon fiber Rear Seat Delete Kits,  custom leather Shift Boots, billet interior trim, upgraded Seat Upholstery packages and a few other goodies are available for the new GT500.

    With 662 horsepower from the factory the GT500 is not short on power but there is more power to be made from the TVS blower and the 5.8L aluminum block.  With a smaller supercharger pulley, tune and a set of long tube headers GT500 owners are seeing reaching over 700 RWHP without even changing the factory TVS supercharger. 

    The 2013-2014 Shelby GT500 is one awesome vehicle and with the variety of aftermarket parts and accessories available the sky is the limit along with your budget.  See our selection of 2014 Shelby GT500 Parts.

     


    24

    Mar

    Mustang WindRestrictor

    By Mr. Bangastang | Posted in Accessories

    The Mustang WindRestrictor is the most unique accessory for the Mustang convertible EVER!  Made from acrylic, laser etched with your choice of logos and illuminated in several colors this product will be the hot item for Ford Mustang convertible owners.

    Mustang WindRestrictor

    Mustang WindRestrictor

    The Mustang WindRestrictor is available for the 2011-2014 Mustang, licensed by Ford it’s available with a laser etched logos that include Mustang, Mustang GT, Tri-bar, Running Horse, SVT Cobra, Old School Cobra and Tiffany Snake as shown. Since the graphic is laser etched there is no decal to fade or peel.

    Made from 3/8th inch Acrylite glass that is fully transparent which uses the best materials, a Lifetime warranty is included with the Windrestrictor.

    You can order your Mustang Windrestrictor in eight different colors….red, blue, green, white, amber, orange, purple and pink.  The Windrestrictor can be wired to the headlights or brake lights in less than an hour.  Most car audio shops can do the installation or you can do it yourself.  No drilling, adhesive tapes or Velcro is required for installation.  Complete instructions are included with the WindRestrictor. Just imagine your favorite Mustang logo lighting up every time you apply the brakes.

    For those that want a more customized touch, personalized laser etching is available for an additional cost.  Have your club name, logo, VIN number, horsepower rating, nickname, shop name or a photo laser etched onto the Windrestrictor.  This is one Mustang accessory that takes customizing to the next level.

    Beside being stylish the WindRestrictor is also functional by reducing wind turbulence which allows you to carry on conversations without raising your voice.  You’ll be able to hear your music with your top down.  Ladies will be able to take long trips and not worry about their hair.  Driving a convertible on long trips can be tiring due to wind turbulence now you can arrive without the fatigue.

    The WindRestrictor mounts behind the rear seat and does not interfere with passengers sitting in the back seats.

    2011-2014 Mustang convertible owners if you’ve been looking for the special Mustang accessory that will raise the bar in styling for your convertible then we strongly encourage you to pick up this gem it will make your V6, 5.0 or Shelby GT500 one sweet looking ride.  Here’s our selection of Mustang WindRestrictors

    Mustang WindRestrictor


    9

    Mar

    Mustang Radiator Covers

    By Mr. Bangastang | Posted in ENGINE DRESS-UP

    Our Mustang Radiator Covers is a custom accessory that is made upon order.  We manufacture Radiator Covers for the ’05-’09 Mustangs, ’07-’09 GT500, ’10-’14 GT500 and the ’13-’14 Mustangs.

    Bangastang Radiator Cover 07-09 GT500

    Bangastang Radiator Cover 07-09 GT500

    All of our Bangastang Radiator Covers are made in the US using top quality fiberglass materials.  We believe in supporting the US economy with American made products.

    Because our  Mustang Radiator Covers are custom made order, we do not believe in a one size fits all product, the majority of our customers compete in car shows and are looking for product that is tailor made to their Mustang, Roush, Bullitt, BOSS, GT500, Shelby GT and Super Snake. Many Mustang owners have added aftermarket hood pins, superchargers, cooling tanks and cold air intakes which in most cases require that we modify the Radiator Cover for proper fitment.  If necessary we will send a template to our customers which they will trim according to the modifications of their Mustang and send back to us which we will use as a guideline to make their Radiator Cover. The image below shows one of our Bangastang Radiator Covers modified for a Bullitt Mustang.

    Radiator Cover modified for Bullitt Mustang

    Radiator Cover modified for Bullitt Mustang

    For the 2007-2009 GT500 there are several Cold Air Intakes on the market and it’s imperative that the owner provide us with the brand name and model of the Cold Air Intake that is installed on their GT500 so we can modify specifically for their CAI.  Our Radiator Covers were designed to have an OEM look.

    Bangastang Radiator Cover modified for FRPP Gen 1 CAI

    Bangastang Radiator Cover modified for FRPP Gen 1 CAI

    Our Bangastang Radiator Covers are painted with Spies Hecker paint which is a top quality product.  All of painted products are clear coated, wet sanded and buffed before shipping.

    Bangastang Radiator Covers just painted.

    Bangastang Radiator Covers just painted.

    Before shipment all of our Radiator Covers are inspected prior to packaging.  If a Radiator Cover does not pass our inspection it will be repainted until it meets our standards. Quality is our #1 priority when it comes to our products, we manufacture products for show cars.

    Bangastang Radiator Covers

    Bangastang Radiator Covers

    If you’re a late model Mustang owner we probably have a custom Radiator Cover for your Mustang, Cobra or Shelby.  Use coupon code blog for a $15 discount when ordering our Radiator Cover on our website.  For more information just click on Bangastang Radiator Covers.


    8

    Mar

    Carbon Fiber Mustang Console

    By Mr. Bangastang | Posted in Carbon Fiber

    The Carbon Fiber Mustang Console for the ’05-’09 Mustangs is a TOP quality Mustang accessory. If you’re a ’05-’09 Mustang owner that likes unique accessories then the Center Console should be on the top on your list for Mustang products to buy.

    Carbon Fiber Mustang Console

    Carbon Fiber Mustang Console

    If you’re a Mustang owner that wants to stand out from the rest of the Mustangs at your local show finding unique products is paramount in competing on the car show circuit.  How many times have you seen the same accessories on 30 Mustangs at your regional Mustang show?

    The Center Console will fit all 2005-2009 Mustangs with an automatic or manual transmission. A direct replacement to your factory Center Console this carbon fiber gem is made from 2×2 twill carbon fiber.  Made with high quality epoxy resin that uses a vacuum formed process this Mustang  Console is lighter than the factory unit.  A UV protectant clear coat is used that resist yellowing and fading and gives the Center Console a high gloss finish that is backed with a one year warranty.

    Installed in 2008 GT500

    Installed in 2008 GT500

    Installation instructions are included with the console which can be installed using basic hand tools.

    The Carbon Fiber Mustang Console is made using 100% carbon fiber, not an overlay. The design maintains the uses of the factory armrest cover and cup holders.  The console does not come with a provision for the ambient lighting switch, that modification can be made by the purchaser.

    For those of you that want to be different when styling your 2005-2009 Mustang, Saleen, Roush or Shelby we’re offering a a special sale the month of March of the console……$15 OFF the regular price of $375.  Use coupon code centerconsole when ordering on our website.  To place your order just click on the following Carbon Fiber Mustang Console


    3

    Feb

    BOSS Mustang Radiator Cover

    By Mr. Bangastang | Posted in ENGINE DRESS-UP

    The 2013 BOSS Mustang is one of the most awesome Mustangs ever built.  With performance and styling the BOSS is considered one of the most balanced Mustangs and for good reason. We couldn’t wait to get our hands on a BOSS and design one of our Radiator Covers for it.

    BOSS Mustang

    BOSS Mustang

    One of our clients Milt in San Diego was nice enough to bring his “Got to Have it Green” BOSS by our shop and leave it with us for a few hours while we laid out the template for the stripes.  The 2013 Boss has a total of seven stripes which is quite different from the factory stripes that appear on the GT500s and Roush Mustangs.  The stripes on the BOSS have a matte black finish to them and are reflective at night under the light another unique feature that separates the BOSS from other Mustangs.  Our new Bangastang Radiator Cover for the 2013-2014 Mustang would fit the BOSS it was just a matter of laying out the tape lines; this would not be an quick or easy job. The tape lines had to be perfect for the BOSS.

    BOSS Radiator Cover Mock-up

    BOSS Radiator Cover Mock-Up

    After the stripe lines were laid out by hand we set up a laser on a tripod to double check the alignment of the stripes.  One thing to keep in mind because our Radiator Cover has curvature in the shape the stripes must be perfect, using a laser would insure alignment.

    BOSS Mustang Radiator Cover

    BOSS Radiator Cover Mock-Up

    After two hours of stripe layout it was time to apply the matte black paint for the stripes. The paint for the stripes is applied over the base coat.  Because the stripes have a matte black finish the stripes can’t be clear coated so we used a single stage paint with a matte black finish.

    BOSS Mustang Radiator Cover

    BOSS Mustang Radiator Cover

    Milton was our first to get our BOSS Mustang Radiator Cover but will not be our last.  The BOSS is a special car and needs love just like all the Mustangs.   So far our most popular color for our Bangastang BOSS Mustang Radiator Cover has been “Got to Have it Green”, I wonder why?

    BOSS Mustang Radiator Cover

    BOSS Mustang Radiator Cover

    If you want more information about our Bangastang Boss Radiator Cover just click on the following BOSS Radiator Cover

     

    BOSS Mustang Radiator Cover

    6

    Jun

    Count your Blessings not your Horsepower

    By Mr. Bangastang | Posted in Random

    With all the natural disasters that have taken place….tsunami, earthquakes, floods, and tornadoes, I can’t help but feel a great deal of sadness for the victims and survivors of victims.  Loved ones and generations of families have been wiped out in seconds.

    The stories that we’ve watched on television are just a one minute and thirty second snippet into the lives of people that have lost sons, daughters, grandparents, parents, friends, pets and all of their possessions.  No prom, no wedding, no 25th wedding anniversary, no pearl necklace that belonged to my great grandmother…..all gone.  A one minute and thirty second news story can’t touch the depth of the pain and grief that Joplin Missouri must feel.

    Too many of us are whiners, we complain about material things that we are blessed to have.  My Mustang needs a paint job, but you have a car.  I need to get my windows tinted on my GT, but you have windows. I need 20s on my GT500, you have a car.  Maybe some of you can’t imagine not having a front door, least of all a home that still stands or a closet full of clothes.  The phrase “gone in 60 seconds” does not necessarily apply to car.  Don’t think for a moment that you’re safe, tragedy can happen to anyone of us in a blink of an eye.

    Take a couple of hours to realize what you have and how blessed, not lucky you are.  Think about the tornado victims that can’t find their homes because it’s been torn away.

    Please make a donation to aid the victims of the recent tornadoes.  We’ve got over 2,200 fans on our Bangastang Facebook Fan page, if everyone of you donated $25.00 that would be $55,000 raised to help victims.  Count your blessing not your horsepower and help.

    Thanks,
    Bangastang

    Bangastang Blog

    12

    Oct

    Carbon Fiber Mustang GT Plenum Cover

    By Mr. Bangastang | Posted in Carbon Fiber

    Need a new look for your ’05-’10 Mustang GT engine.  Check out this classy carbon fiber Mustang GT Plenum Cover from Bangastang.  Made from top quality carbon fiber with a marine grade UV resin gelcoat.  If you’re tired of seeing the same old stuff on a Mustang then this piece from Bangastang will set your GT Mustang off.

    Don’t be a follower be a leader and set your Mustang apart from the others with products from
    Bangastang.  Price $350.

    Here’s the link  Carbon Fiber Mustang GT Plenum Cover 

     

    Bangastang Blog

  • FROM TWITTER

  • SUBSCRIBE & CONNECT